It's common for hard-wired cameras and remote cameras connected via the local network to not be exactly synced up. This is due to the nature of their individual workflows; wireless signals generally travel slower than directly connected signals.
To resolve this, Studio has a simple setting to sync all your camera sources together.
Click the gearwheel in the upper right corner of Studio, then click the Advanced tab.
This only works for remote cameras utilizing the same network as Studio, such as Mevo cameras. This does not apply to Remote Guests, RTMP server, or other streams.
Navigate to the Remote Inputs Synchronization setting and select Delay All Inputs by 1 Second and Synchronize. This will allow your wired inputs to compensate for the latency experienced by wireless sources and sync them together.
If you are only using remote camera sources, then select Delay Remote Camera Inputs by 1 Second and Synchronize.
Be sure to save your settings.