You can transcode and export videos from Apple Compressor. This article discusses how to prepare your video for Vimeo using Compressor.
If you want to upload your video in Dolby Vision using Compressor, our partners at Dolby have a tutorial available at 'How-To: Dolby Vision Encoding - Apple Compressor for Vimeo'.
In this article:
How to prepare my video for Vimeo using Compressor
We have recommended specific settings below, however, we can't guarantee that these settings or navigational steps are up-to-date or applicable to any third-party software. Always keep our main video and audio compression guidelines in mind and refer to Apple's user guide for Compressor.
You can prepare your video within Compressor. To do so:
- If you imported your video into Compressor directly from Final Cut Pro, it should already be preloaded into the main window. Otherwise, import your file by clicking Add File in the lower panel. (Alternatively, you can navigate to File > Add File... Select your video file, then click Add.)
- Navigate to Window > Show Settings & Locations. (If the settings/locations menu is already shown, you can skip this step.)
- In the bottom-left corner, click the "+" symbol and select "New Setting." Read about creating custom settings from Apple at 'Create custom settings in Compressor'.
- In the Format dropdown, select MPEG-4. Give the setting a Name (for example: "Vimeo Export") and a Description (e.g., "Export setting for Vimeo"). Then, click OK.
- In the settings panel on the left-hand side, select your new preset.
- On the right-hand side of the screen, under the General tab, choose the options shown at the bottom of this article.
⚠️Note: If the General tab is not appearing, select the equalizer icon ().
- Select the options under the Video tab as shown in the tables below (Video Properties, Cropping & Padding, Quality).
- Skip the Video Effects section.
- Under the Audio tab, select the options in the table below (you can skip this step if your video does not contain audio).
- Skip the Audio Effects section.
- Your export preset is now ready. Choose Add next to the filename to apply your preset. Then select a destination on your computer to export your file to (such as your Desktop).
- You can also drag the Vimeo Export preset over your file to apply it.
- Once you’re ready, click Start Batch to begin the export process. You can watch the progress of your compression job in the Active tab.
- Once the compression process has finished, view your finished file to make sure it looks and sounds correct, and upload it to Vimeo via your web browser.
Compressor settings overview
General |
|
| Name | Leave as-is |
| Description | Leave as-is |
| Default location | None |
| Format | Video and Audio |
| Optimize for network use | Unchecked |
| Set duration to | 100% of source |
Video Properties |
|
|
Frame Size Vimeo uses some unique calculations to determine the available playback qualities for your video. Read how at 'Determining playback resolution'. |
Choose your desired frame size from the list under "Manual." If you aren't sure what frame size to use, choose "Automatic." |
| Pixel aspect ratio | Square |
|
Frame rate You can enter a custom frame rate by choosing Automatic and entering your new frame rate value to the right of the dropdown. There are some situations where you'll want to choose a frame rate different from the source:
If you upload a frame rate that is higher than 60 FPS or lower than 15 FPS, Vimeo will automatically adjust the frame rate for you. However, we can't guarantee the results will always look as expected. It's best to do the conversion on your end prior to uploading. |
Under "Manual," choose your source video's native frame rate. If you aren't sure which frame rate to use, choose "Automatic." |
| Field order (if applicable) | Same as Source or Progressive |
| Color Space |
Rec. 709 💡TIP: If you’re working with HDR videos, you can set this value to Rec. 2020 (note this setting should only be used for videos recorded and mastered in HDR) |
| Codec | H.264 |
| Profile | For HD footage, choose "High." For SD footage, choose "Main." |
| Entropy mode | CABAC |
| Keyframe interval | Automatic |
|
Data rate These data rates are suggested for average video files. If your video contains below-average visual complexity (such as a slideshow presentation), choose a lower data rate. If your video contains above-average visual complexity (such as a video with high levels of grain), increase the data rate. Remember: Lower data rates lead to smaller file sizes and faster uploads! Experiment to pick the lowest data rate that yields acceptable image quality. |
Custom. Use the slider to choose a value appropriate for your video. SD 2000 – 5000 kbps 720p 5000– 10,000 kbps 1080p 10000 – 20000 kbps 2K 20000 – 30000 kbps 4K 30000 – 60000 kbps 8K 50000 – 80000 kbps |
| Multi-pass | Unchecked |
| Allow frame reordering | Checked |
| 360 Metadata |
For standard, non-360 videos, set this value to “None” For 360 (e.g., spherical) videos that do not already have video metadata, set this value to “Spherical V1” or "Spherical V2". Read about working with 360 metadata from Apple at 'View 360° video metadata using Compressor' |
Cropping & Padding |
|
| Cropping | Custom (Top/Bottom/Left/Right should all be set to 0) |
| Padding | Preserve Source Aspect Ratio |
Quality |
|
| Resize filter | Anti-Aliased (Best) |
| Retiming quality | Best (Motion Compensated) |
| Adaptive details | Checked |
|
Anti-aliasing level If your video contains aliasing (jagged edges), you may wish to increase this value. Use sparingly. |
0 |
|
Details level If your video has soft edges, you may wish to increase this value. Use sparingly. |
0 |
Audio |
|
| Channel layout |
-Standard mono -2-channel stereo audio -Surround audio with 5.1 and 7.1 channel layouts -Spatial audio in the first-order and second-order ambisonic format (AmbiX) |
| Sample rate | 48 |
| Format | AAC |
| Quality | Maximum |
| Data rate | 320 kbps |
| Bit Rate Strategy | Variable |